BlinkenLEDS pro documentation? (EN)

Dieses Forum ist für alle 144-Pixel-Projekte, die noch kein eigenes Forum haben, wie z.B. BlinkenLEDs, LittleLights, BlinkStröm...
Post Reply
cyphunk
EinmalBlinker
EinmalBlinker
Posts: 1
Joined: Mon Jan 10, 2005 11:12 pm

BlinkenLEDS pro documentation? (EN)

Post by cyphunk »

(sorry for cross post also sent this to the mailing list but noticed no activity in over a month... hoping this forum is a bit more frequented)

I purchased the LEDS Pro kit and I'm trying to figure out how to solder the conductive wire to the board. The solder just doesn't hold. Any help, clues, places to RTFM?
User avatar
stefan
Blinkenizer
Blinkenizer
Posts: 234
Joined: Wed Oct 09, 2002 9:45 pm
Location: Aachen
Contact:

Post by stefan »

The mailing list is not that inactive - You must have found the archives of the old one...

I'll also give a short answer here, for the case anybody else wants to know:

There is a little error on this board, the solder pads for the wire got covered with solder stop. You'll have to scratch off the solder stop from the pads to make soldering possible.
Post Reply